- The video contains video material about Ranails BCT products, which are identical in their properties to the Fusion system
System:base, color, top coat in one
This is a gel polish base, color and top coat in one product;
This is a thick gel polish that adheres perfectly to the nail, fills the grooves of the nail and fills in irregularities;
This is an excellent Structural gel that gives strength to the natural nail;
can be used as a thick base coat before gel polish.
Advantages:
This is an opportunity to do an “Express” manicure in 30 minutes.
Smoothes out unevenness and grooves of the natural nail.
Can extend nails by 5mm.
TOP colors that everyone will like!
Safe and highest quality formula, made in the USA
Strengthens weak and thin nails
CONSISTENCY
Medium thickness;
Does not run to the sides of the nail;
Self-leveling;
Easy to shape.
Instructions for use
1. Disinfect your and the client’s hands.
2. Gently push back the cuticles around the nails with a special tool.
3. Roughen the nail plate with a 180 grit polisher.
4. Brush away dust from the nails.
5. Degrease the nails with a special nail degreasing liquid Dehydrator.
6. If the nails are thin, weak and flaky, it is recommended to use a Primer designed for use before gel polish (Supernail Superbond; IBD Powerbond).
7. Apply an extremely thin layer of Gellacco FUSION. Carefully cover the free tip of the nail. Do not touch the cuticles.
8. Immediately place a larger drop of Gellacco FUSION gel on the middle of the nail and spread it over the nail. Ask the client to turn her hand palm up and hold until the Gellacco FUSION product automatically smooths out on the nail.
9. Keep under the UV lamp for 2-3 minutes, and under the LED lamp for 30-60 seconds.
Then there are 2 options: 1. Clean the nails with a cleansing liquid and apply oil to the cuticles. 2. Apply a top layer of gel polish to make the nails more shiny. Then apply oil to the cuticles.
Gellacco FUSION can be dissolved or refilled!
Gellacco FUSION dissolving
1. Roughen the nails with a soft block.
2. Moisten a cotton swab with Artificial Nail Remover solvent.
3. Place the swab on the nail, wrap it tightly with a piece of foil/rubber thimble and wait 10 – 15 minutes.
4. Remove the foil/thimble from the nail and remove the ‘bounced’ polish mass with a plastic stick.
Gellacco FUSION addition
1. Use a 180 grit file to remove the Gellacco FUSION mass that has bounced off the nail. Remove dust.
2. Roughen the entire nail plate with a 180 grit polisher.
3. Brush away dust from the nails.
4. Degrease the regrown natural nail with a special nail degreasing liquid Dehydrator.
5. If the nails are thin, weak and flaking, it is recommended to use a Primer designed for use before gel polish (Supernail Superbond; IBD Powerbond). Apply only to the regrown natural nail.
6. Apply an extremely thin layer of Gellacco FUSION. Carefully cover the free tip of the nail. Do not touch the cuticles.
7. Immediately place a larger drop of Gellacco FUSION gel on the middle of the nail and spread it over the nail. Ask the client to turn her hand palm up and hold it until 8. Gellacco FUSION product automatically smooths out on the nail.
Keep under UV lamp for 2-3min, and under LED – 30-60s.
Then 2 options are possible: 1. Clean the nails with cleansing liquid and apply cuticle oil. 2. Apply the top layer of gel polish to make the nails more shiny. Then apply cuticle oil.
Storage and use characteristics
Store in a dry place, at a temperature of 5–25 °C. Keep away from heat sources and direct sunlight. The product retains its properties only if properly stored in undamaged packaging. Store the product in its original packaging.
It is recommended to use within 12 months from the date of opening.
Warning!
For external use only. Keep out of reach of children. Do not swallow, do not inhale. In case of contact with eyes, rinse with plenty of water. Do not use if allergic to one or more ingredients. Do not use the product if its packaging is damaged. Due to the origin of the ingredients, the appearance of the product from different batches may vary – this does not affect the quality of the product.
Manufacturer
Powstancow Warszawy 69, 83-000 Pruszcz Gdanski, Poland.
Country of origin USA
Ingredients
Di-HEMA Trimethylhexyl Dicarbamate, HEMA, Isobornyl Methacrylate, Cellulose Acetate Butyrate, Hydroxycyclohexyl Phenyl Ketone, Glycol-HEMA Methacrylate, PEG-9 Dimethacrylate, Silica, Bis (methacryloyloxyethyl) Phosphate, P-hydroxyanisole, Hydroquinone Titanium Dioxide/CI 77891, Red 7/CI 15850, Ultramarines/CI 77007, Yellow 5/CI 19140.
